Mute Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece clips onto a music stand for holding a single trumpet or horn mute.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This piece clips onto a music stand for holding a single trumpet or horn mute. It'll hold bucket mutes, straight mutes, plungers — pretty much anything, just only one at a time. Need more, print another and clip them next to each other. This one also collapses for each storage.
EDIT: I've updated all the files to fix the scaling issue with them (wrong unit originally).
Print instructions
Licence: Creative Commons - Attribution Category: Music Print Settings
Printer Brand: RepRap
Printer: Prusa i3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 1mm
Infill: 20%
Notes:
I did end up having problems with the pins printing so they'd fit within the hinges (they ended p printing a little big). I just solved it by replacing the printed pins with straightened paperclips which worked just fine.
Post-Printing
Finishing
I did a little post print finishing on this by giving it some basic sanding, applying a coat of XTC-3D, a little more sanding, and then a light coat of spray paint.