Geocache Container for 60 mm pipe posts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Geocache Container was designed to be placed onto a 60 mm pipe post for e.g. road signs.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 304
- Wydruki
- 5
- Wyświetlenia
- 1216
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Geocache Container was designed to be placed onto a 60 mm pipe post for e.g. road signs. The container can hold Standard Logbooks for PETlings as well as a pencil.
Size:
- inner Diameter of Cap: 60,8 mm
- Container
- inner heigth: 110 mm
- inner diameter: 22 mm
Printing:
| Layer height: | 0.15 | |
| Supports: | No | |
| Brim: | No | |
| Material: | print tested with PETG and PLA due to weathering I would recommend PETG, depending on the location PLA may also work. | |
| Shell: | Perimeter / Wall Lines: Top Solid: Bottom Solid: | ≥4 ≥5 ≥5 |
To make the lid as waterproof as possible, the number of perimeters is one important element influencing how waterproof the final print is. The more perimeters you use, the higher chance you have to end up with a waterproof print. In addition the base of the lid should have at least 5 solid layers.
The uploaded example is printed with PLA filament in black matt and multicolour from “Das Filament”
The Geocaching logo is a registered trademark of Groundspeak, Inc. DBA Geocaching. Used with permission. ( https://www.geocaching.com/about/logousage.aspx )