Spool for "Angel Hair" Christmas Lights

My wife has christmas lights which are called “Angel Hair”

These are some very thin wires with small LED's built in. It's so much pain to store it without having to untangle the thin wires the next year.

I used these spools to wind the wires up. It's possible to wind up 2 or 3 wires at the same time on the same spool. The small gaps are to fix the end of the wires before winding up. If it's winded up until the top, I fixed it with a small piece of velcro cable tie.

There are 2 Versions. One is the STL without anything. The 3mf ist with a modifier to make the honeycomb pattern (10% infill so the holes are big enough for the velcro. The black one is 15% which was very tight)

My Print Instructions/Settings

Orientation: On the Side

Supports: Yes (I used organic supports)

Modifier like in the 3mf if you want. For the modifier, I needed to use 3 perimeters, otherwise, PrusaSlicer made some interesting things.

I printed mine with a 0.4mm nozzle and a 0.6mm nozzle, both no Problem.