M-LOK Barricade Handstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an M-LOK Barricade Handstop I designed as I liked the look and idea behind it.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 315
- Wydruki
- 0
- Wyświetlenia
- 1323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an M-LOK Barricade Handstop I designed as I liked the look and idea behind it.
Uses two M-LOK bolts and nuts. I made them big enough so any bolt should fit through. Holds on extremely well.
Mainly printed for looks over functionality, since I assume the PLA pikes would flatten very easily. Try something stronger like ABS or CF Nylon for a more functional print.
I used 0.12 resolution to make the pikes more fine and sharper.
4 walls 100% infill for best strength.
Print as shown in stl file and use supports on build plate only.