Infinity LED Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-piece model designed to be printed in two colours to allow the Diffuser and Inlay to reflect and diffuse the LEDs.
- Ocena
- 3,667 / 5
- Polubienia
- 160
- Pobrania
- 440
- Wydruki
- 3
- Wyświetlenia
- 2641
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I created this Infinity LED Lamp in order to make it easy (or at least easier) to install some LED strip inside which gives some great results once assembled.
I printed the body & cover in black and the diffuser and inlay in white. The inlay can be dropped in first and this acts to reflect the LED light back up. The LEDs can then be installed, and the cabling routed through to the ‘control box’ at the bottom. You can then slide in the diffuser and install the control box cover.
I used 5V WS2812B LED strip with a Wemos D1 Mini in the control box. Combining this with WLED gives some stunning effects, all controllable via a free Android app over your WiFi. As a side note, I created a preset in WLED and made this the default when it powers up, so you never need to connect to the lamp once it has been set up if you don't want to.
This is technically Version 2 of this idea as I made the first one for myself. Whilst I learned quite a bit when creating this one, I have no doubt it could be improved but I am happy enough with this version for now.