Turin SD 40 58mm PortaFilter Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was remixed from ktek's 53/54mm holder. I increaded the size to accomodate a 58mm portafilter and a funnel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a portafilter holder for the Turin SD 40 grinder. This was remixed from ktek's 53/54mm holder. I increased the size to accomodate a 58mm portafilter and a funnel. Depending on the portafilter, you may need to rotate it anticlockwise to remove the portafilter from the holder. The left wing of my portafilter gets stuck sometimes
I printed it with tree supports. I had to fight to remove the supports from the portafilter tab section with standard supports, so treeshould be easier
Hardware required:
1x M3 20mm
1x M3 Nut