1 / 1
Japanese Yen Coin Wallet (Holder) — zdjęcie 1

Japanese Yen Coin Wallet (Holder)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Portable Coin Wallet/Holder for Japanese Yen

Ocena
4,667 / 5
Polubienia
68
Pobrania
304
Wydruki
3
Wyświetlenia
3732
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a Portable Coin Wallet/Holder for Japanese Yen

It was made by holding coins one by one.
Therefore, it is easy to use if you insert it one space at a time from the bottom.

 

Hardware

Mainly M3 series bolts and Standoff Nuts are required. 

  • M3 Standoff Nuts - (Hex) 2 EA +  1 EA (Round (OD 6mm) or Hex)
  • M3 Bolt (Flat head) - 3  EA (Adjustable according to nut length)

 

 

 

 

 

 

 

 

 

(Standoff Nut Length)

  • 1-5-10 Yen : Holder Parts (1.6T) - 6 EA (10mm), 22 EA (20mm)
  • 50-100-500 Yen : Holder Parts (1.9T) - 5 EA (10mm), 6 EA (12mm)
  • 100x3 Yen : Holder Parts (1.9T) - 5 EA (10mm), 6 EA (12mm)

 

Printing 

Print some parts using brim or raft.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ass'y Guide

After inserting the Holder Part into M3 Standoff (Hex) x2
Assemble Plates 1 and 2 with bolts on both sides, along with the cover with a round standoff (or Hex).

 

Update

23.12.31 - Add 100x3 Yen Ver. + First Upload

Tagi