FGC6s airsoft springer kit for FGC-9 MK-I MK-II 2023 re-release package
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the release of the fgc6s starter set
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
11-08-2025
M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt
-------------
11-10-2024
M5 nut lower have been added. for a stronger connection
it will use a 30mm long M5 bolt with 3d printed grips
-------
9-10-2024
Endcap Shims from the p9
brass insert lowers have been updated to a 4.15mm hole
-----
7-10-24
the brass inserts uppers have been updated to have a 4.15mm hole so it's a bit tighter then the original was
--
4-10-2024
the stock MKI and MKII butt-stocks have been added
---
14-09-2024
UNW hopup part- added
3mm OD spring grips- added
TPU barrel - modded / expanded
mag catch bar - modded / expanded
----
22-1-2024 update
MKII acrylic bolt added. and tester data.
-
updated all bolts with the cut for the UNW hop up unit
----
21-1-2024 update
MKI bolt was missing the connected cutout. this have been updated
for both the MKI and MKII size options of TPU cups have been added. to find the right fitment
--
20-1-2024 update
MKII spring guide rod was to long (I forgot to edit this file) can be manually shorten if already printed.
also for the MKII model the TPU piston mount tolerances are improved.
--
12-1-2024 update
MKI bolts and tester data added
_______
a fresh look at the old design of the FGC6S after making the other models I originally attend to make. and some research into airsoft springs. made me wanting to chance some parts in this model.
what does this mean for old builders? a extra double stack mag option.
and some better bolt/piston designs that are basally a drop in upgrade for your old build.
for new users this mean magazines with a last round disconnect option. so you can see that your magazine is empty.
a hopup unit that is easy to adjust, or go fro the 3d Printed barrel with TPU bucking option. just keep in mind that will not out preform a actual airsoft barrel
a bolt and piston design that is more like actual airsoft springers are made.
sanding tools to make the internals more smooth. so it should give you a better performance.
to be fair FPS wise it’s still low don’t expect any thing over 100/120 FPS with short barrels.
the PDF’s can give you more info on this (once completed)
----------------
the parts list and the documentation to get started can be found here the link to the new manuals can be found here
https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing
---------------
-
look for shrouds and stock in the FGC-6FA MKI or MKI collections
FGC-6S MKII links
https://www.printables.com/@UntangleWORKS/collections/88897
https://cults3d.com/en/design-collections/UntangleART/fgc-6-s-mkii
FGC-6S MKI and Hybrid
https://www.printables.com/@UntangleWORKS/collections/8890
https://cults3d.com/en/design-collections/UntangleART/fgc-6-s-mki
-
movie link:
upper sand tool
https://youtu.be/-QtMWLSduyY
video link to the new hopup unit
-
FGC-6s play list
https://www.youtube.com/playlist?list=PLVTi8DENyyvzyj-sJf7VZAewx8D8bnAt6
-
print settings:
0.2 layer height should be fine.
you can use the 8 layer walls and a 40% infill.