1 / 5
PURSA Enclosure Top Plug with Bowden Tube Hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of PRUSA Enclosure Top Plug with an added hole for a Bowden Tube (PTFE Filament Guide). Modeled with a 4.0mm OD
- Ocena
- 4,5 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 3
- Wyświetlenia
- 416
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (21)Powiązane
Top-plug-edge.stl, but added a 4.0mm diameter hole, centered, to route a bowden tube from above printer to inside it.
Print it with PTFE or similar to withstand wear\loading\temperatures.
Is a very simple print, but enabled me to safely\nicely route the tube.
