1 / 3
HGX Lite 2.0 (oblique tooth) extruder mock-up model — zdjęcie 1
1 / 3

HGX Lite 2.0 (oblique tooth) extruder mock-up model

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths).

Ocena
5 / 5
Polubienia
35
Pobrania
828
Wydruki
0
Wyświetlenia
4010
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths).

 

Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position. Coordinates are based on filament path (XY) and bottom of extruder (Z).

There are 3 STL-s:

  • only extruder
  • extruder with standard Nema14 20mm depth (as sold in set with extruder)
  • extruder with short Nema14 17mm depth (like Moons motors sold with TBG-Lite)

Source files in OpenSCAD can be downloaded from https://github.com/majekw/vn-corexy/tree/main/HGX-Lite2

Tagi