Echo Show 5 Wall mount - 2 pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for the Echo Show 5, it is divided in 2 pieces, for make the printing easy and the model looks better IMO.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 383
- Wydruki
- 3
- Wyświetlenia
- 1955
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I was searching for some Echo Show 5 wall mount, but didn't found any that catch my eye.
So, using this as practice for Fusion 360, I was able to design this model.
I used this Echo Show 5 model from DockGuy ( https://www.printables.com/model/35715-amazon-echo-show-5-model ) as reference for the base, so its pretty acurate.
Added 4 pockets to glue some round magnets (12x2mm).
As I said the model is conformed by 2 parts, the one that is mounted on the wall, and the one that serves as dock for the Echo, they fit together with 2 dovetails, allowing some space behind the base so you can hide the cable.
For the screws I can't remember exactly what I used, but the hole for the screw have 5mm of diameter, and for the head 8.6mm of diameter.
Use your usual printer setting. Just add at least 3 perimeters, and 20% infill.
Hope it can serve you as it served me.