Dog Poop Bag Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dog poop bag dispenser. My dog chewed up the one I bought from the store so I modeled up a replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This is a dog poop bag dispenser. My dog chewed up the one I bought from the store so I modeled up a replacement. This works just as well as the original. I printed the body/tube from PETG, and the caps are TPU (Filatech FilaFlex 40).
No supports necessary. Print as is. The tube could probably be printed out of PLA but I think PETG will be better in the long run. The caps must be able to flex to fit on and off the tube snugly.
I modeled this using OnShape and I've included the .step files if you'd like to make any changes. The loop on one of the caps has been made a bit thicker than in the picture so it can handle a little more strain.