1 / 3
Fysetc 1284mini LCD display mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mountable display cover for the mini1284 control. Uses 2 M4 flat head screws to mount on any vertical surface. Screws…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mountable display cover for the mini1284 control. Uses 2 M4 flat head screws to mount on any vertical surface. Screws are slanted to increase grip on an Ikea Lack or similair. There are multiple hardware setups for reset microswitch, let me know if you need me to tweak the design to accomodate for those. Rendered version is of my specific cover with embedded text, but I have also uploaded a version without the text. I have also printed the button inner insert out of translucent filament because of neopixel led events. Backlid is a friction fit and hasn't been properly tested yet. Let me know if it does not work for you, will make changes if necessary. Print Settings
Rafts:
No
Resolution:
0.2
15%
Filament: generic PLA
Notes:
Resolution and infill should not matter, however 0.2 gives a nicer result on the large overhang
Category: 3D Printer Parts