Activated charcoal filter Quidi X-Max 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the activated carbon filter by @Randy Salamon. I have only used the screw-on points from the original
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 962
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can use activated carbon pellets with my version. The unpleasant odour when printing ASA or ABS is reduced very well.
IMPORTANT !!!
You should be aware that despite the filter, toxic gases still circulate. So only process these materials in well-ventilated rooms.
I printed it from ASA at 0.2 layer height and 40% infill.
I sealed the mounting surface with sealing tape and used longer screws.
I also enclose the Fusion360 file. Maybe someone would like to improve something.
I would be pleased to receive makes with photos.
Have fun printing.