1 / 4
Gas Can Spout — zdjęcie 1
1 / 4

Gas Can Spout

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A gas can spout to replace the stock version

Ocena
5 / 5
Polubienia
63
Pobrania
416
Wydruki
1
Wyświetlenia
2293
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Public Domain

Buying a decent gasoline can in the US (retail) can be a challenge.

The original spout design (Home Depot, Lowes etc.) was an overcomplex mishmash of a locking mechanism with a spring-loaded thing going on.  It had like 5 pieces and maybe worked for about 6 months before moisture got to the spring.  It didn't function at all at that point and was frustrating when gas didn't come out.

This replacement does exactly what you want a spout to do, and uses the same components (gasket, screw-on base, and yellow end cap) and functions with a breather tube.  

I chose Polycarbonate for a material for its improved resistance to gasoline and solvents, but if you don't have it a PLA plus may work out for you. 

The breather tube is a press-fit into the bottom of the spout to better pour gas when tipped, or add a bit of superglue for some insurance.  Print it flat on its side (has a flat surface).

Solidworks file is included for any modifications you need. 

Tagi