1 / 4
Printing Bed Swab Handle for spreading Glue Stick/IPA — zdjęcie 1
1 / 4

Printing Bed Swab Handle for spreading Glue Stick/IPA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I use this tool to even out the glue stick (with IPA) I use on my smooth printing plate

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made this handle to hold a “shop” paper towel for evenly spreading out glue stick after adding a bit of isopropyl alcohol. I usually spread a zigzag of glue stick, then spray a bit of IPA on top using a lab bottle and then use this tool to evenly spread the glue out over the surface. This give the bed a nice even coat of glue quickly over the whole bed.

The design calls for a ¼" bolt and nut to use with the provided knob to tighten on the folded-up shop paper towel as show int he photos.

I used PLA and printed with many perimeters and high infil to keep the handle stiff.

Tagi