1 / 1
Safety razor click-in wall mount for Weishi razors (12mm) — zdjęcie 1

Safety razor click-in wall mount for Weishi razors (12mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Safety razor click-in wall mount for Weishi razors, razors with a 12mm diameter handle

Ocena
0 / 5
Polubienia
5
Pobrania
18
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Share Alike

This is a wall mount for a safety razor. It is custom tailored to fit weishi branded safety razors. Two razors with different patterns on the handle were tried, both fit.

It is a bit rough around the edges - as it really lacks beauty, and could use some bevels, but it is very functional. The razor “clicks” into the mount solidly, and has held strong for 3-4 months of active use since I designed and printed the one you see.

Once mounted, cut the alignment supports. Those supports will ensure that the razor will fit perfectly into both top and bottom pieces. To mount, I just used some 3M command strips for damage-free removal, but any sort of adhesive will do.
 

This really could use some beautification if someone wishes to build upon this.
Blender file with all compnents and modifiers not applied is attached, so it should be easy to work with.

Tagi