1 / 2
Mars 4 Max Resin Vat Cover (Full and Screw Hole) — zdjęcie 1
1 / 2

Mars 4 Max Resin Vat Cover (Full and Screw Hole)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,59 € – 0,72 € netto (bez VAT)

Dla pliku: EN4P_Mars 4 Max Vat Cover.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,66 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
1 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A simple cover for the Mars 4 Max resin vat. Comes with full cover or in-place cover with cut-outs for the screws.

Ocena
0 / 5
Polubienia
4
Pobrania
146
Wydruki
0
Wyświetlenia
672
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple cover for the Mars 4 Max resin vat. Comes with full cover or in-place cover with cut-outs for the screws. The red plastic UV shield does fit with this cover installed. Let me know how you get on, this is my first functional design.

I printed it with the Neptune 4 Plus. The design was created to the real dimensions of the vat, so you'll need to account for the tolerance of your printer. Printed with Horizontal Expansion (Cura): -0.2.

Tagi