8x10x15mm Bronze Bushings to LMU8 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Adapters for converting bronze bushings into standard LMU8 bearings that can be used as a direct replacement…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple Adapters for converting bronze bushings into standard LMU8 bearings that can be used as a direct replacement for all Parts that normaly use these bearings.
Bronze Bushings have to be of this Size:
ID: 8mm
OD: 10mm
Length: 15mm
You have to print 2 parts for every bearing. They should fit perfectly, if not, maybe you need to decrease your flow a little bit. If they dont fit well, they will put to much pressure on the bushings and wont move freely on the rods.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: 3DJake Doesnt matter, but Flow has to be spot on
Category: 3D Printer Parts