Dactyl Manuform External Holder for RP2040-Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an external holder for the Dactyl Manuform keyboard that holds an WaveShare RP2040-Zero and TRS connector
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
UPDATE v2: Got some other RP2040-Zero that did not stay in place so I updated the model to have screws that secure it.
You will need:
- 3 pcs M3 nut
- 3 pcs M3x10 screw
----
I use this with pin headers on the RP2040-Zero and female pin headers so I don't need to solder directly on the headers of the Zero. This way I can re-use it for other projects later.
When female pin headers are added it will be held in place without any glue. Just insert it diagonally and align the USB-C connector with the hole.
An added benefit of the placement is that you can drill a hole in the bottom plate of the keyboard to reach the BOOT button.