Simple Tray 200x150x7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small tray 200mm by 150mm with a small 7mm lip - all top edges filleted.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
I setup every year a Christmas village with lights. I decided this year to try and make the storage and movement of these models easier by putting them all on little trays. This is the tray for the ice-skating rink.
Simple - not much of a lip just to prevent the lego model from slipping around while moving. Something I noticed needed work on the larger models. I also removed the inner edge fillet on the larger models, so there is a square corner inside. This one is filleted on the inner bottom face and that makes grabbing parts easy, but also allows the model to slide out.