1 / 4
FLSUN SR and Q5 Sherpa mini extruder Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Libra/Sherpa Extruder adapter for FLSUN SR and Q5
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Mini Libra Extruder adapter for FLSUN SR
Use three M3 countersunk screw to join the two parts and two M3 screws with inserted nuts for the mini libra extruder.
Cut a piece of ptfe tube to guide the filament to the hotend (all metal or teflon type)
Check that the extruder motor does not interfere with free movement.
Add version angled for better separation with rods thinking install on FLSUN Q5
Enjoy
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: PLA, PTEG, ABS
Category: 3D Printer Extruders