Articulated Wiggler from Mario
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wiggler from Mario with color and articulation between parts.
- Ocena
- 4,5 / 5
- Polubienia
- 111
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 1743
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This model of wiggler has many options. You can Print the main body as a whole and then the accessories and attach them with superglue or print the main body in colored pieces and attach them together then add the accessories.
This model will require supports for the Yellow/Multicolor Full body and the Yellow Main Body including in the articulation. I used tree supports on default setting in Bambu Studio which worked out, although you may need to make some modifications depending on how much you scaled the model.
I scaled the model down to 75% for the one in the cover but it can be done at a bigger or smaller scale due to the adaptable articulation.
Some of the tolerances are very tight and may even require sanding if your printer is less precise.
Due to a portion of this model being created by Bruno Pitanga Maia this model cannot be used for commercial use and requires attribution to him (I do not require attribution but he does).