1 / 6
Nissan 240sx Firewall Brake line clamps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
broke the factory clips off the brake lines on my 240sx so designed these to hold the clamps in using a standard M6…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
broke the factory clips off the brake lines on my 240sx so designed these to hold the clamps in using a standard M6 bolt and rivnut on the firewall. made both the 4 Line clamp( closer to brake booster) and 3 Line clamp (other side of the engine on firewall)
recommended to print in abs to withstand engine bay temps
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker ABS
Category: Automotive
