1 / 3
Aquila Belt tensioner replacement parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement parts for the belt tensioners on the Voxelab Aquila (i havent modeled the Y-axis idler body yet)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hardware:
Knob:
| name | note | quantity |
| M3 Hex Nut | Nylock preferred | 1 |
Guide:
| M3x30 | M3x25 might work as well | 1 |
| M3 hex nut | non-nylock nut preferred | 1 |
| M4x5x4 Heat insert | optional | 1 |
X-idler:
| No additional hardware required |
Files:
| X-idler | Specific to X-axis, might model the Y-axis idler in the future |
| Guide | Works on X, and Y-axis |
| Guide M4x5x4 | Guide, but uses heat-insert |
| Knob | Knob for X and Y-axis, i've found that the stock one can loosen too easily, if you use a nylock nut on this one, it should fix this |
Printing:
Filament: PETG, or ABS
Layer Height: 0.2mm for guide and knob
Wall Thickness: 1.6mm
Infill: 30-40%
Supports: none if printed in default orientation