1 / 5
Minimalist Monitor Shelf Stand / Risers — zdjęcie 1
1 / 5

Minimalist Monitor Shelf Stand / Risers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple riser for a shelf to be used as a monitor stand.

Ocena
5 / 5
Polubienia
15
Pobrania
137
Wydruki
1
Wyświetlenia
662
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

I needed a short but sturdy riser that I could use to turn a cabinet door into a monitor shelf.  I saw a few designs I liked, and this takes inspiration from many of them.  Unlike other shelves I found, I wanted this to be fairly low profile, with just enough room to tuck my keyboard and mouse away when not in use, and to hide away some of the regularly used cords for chargers, my microphone, etc. I wanted the design to be flexible enough so that if I needed to move more cords around, the sides would not get in the way. I also didn't want to see the risers when sitting or standing at my desk normally

What I came up with was this 7 x 2 x 1.5 inch riser with a thru hole for mounting screws that extends through to the bottom so that you can use a standard #1 or #2 Phillips screwdriver.  My shelf surface is only ¾" thick, so I used a pair of #6 dome-top wood screws for each riser. On the bottom of the risers, I used an inch wide strip of adhesive-backed cork as a non-slip foot.

I printed mine in some R3D PETG I happened to have around, but I think any material would work for this.  I printed with 6 perimeters, 8 top, 8 bottom and no infill.

Tagi