Here to Slay Card Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits inside base box and will hold all cards from the standard deck + expansions, sleeved or non-sleeved.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 1189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Settings
- 0.2mm Layer Height
- 15% Infill
- 3 Walls
More Info
This 3D-printed insert is designed to fit inside the base box and will hold all cards from the standard deck + "Warriors and Druids" Expansion + "Berserkers and Necromancers" Expansion, sleeved or non-sleeved.
The standard card areas are 70 x 93mm to hold 63.5 x 88mm (2.5 x 3.5 in) standard-sized sleeves.
The large card area is 82 x 125mm so it can fit a variety of extra large card sleeves in case you weren't able to find 70 x 120mm (2.75 x 4.75 in) tarot-sized sleeves.
I made this because the original plastic organizer was not able to hold the additional cards from the expansion packs. I sell this on my Etsy for people who don't have access to a 3D printer.
https://doctorston3d.etsy.com