1 / 3
headphone holder with loudness knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed both attenuation for a record player and a place to hang the headphones, so both were combined.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Maybe you would like to pay a bit more attention to the wiring, but since I had the guts laying around without a print for about a month this was already a huge step-up… the knob should obviously be upgraded to a printed version.
Printed on the flat backside. Use for example seam-painting to hide the retractions on the underside.
Silicone rope is 10mm in diameter and <300mm length.
Filament: Extrudr XPETG matt black
Seems to be more hygroscopic than other PETG?