1 / 5
Lego Figure Toiler Paper Holder - DI3D Project — zdjęcie 1
1 / 5

Lego Figure Toiler Paper Holder - DI3D Project

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lego figure, with each part able to detatch and attatch.

Ocena
0 / 5
Polubienia
9
Pobrania
20
Wydruki
0
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Lego figure, with each part able to detatch and attatch.

Infill should be around 20% or a bit more

Be careful with the supports, probably you need to decrease the z-axis when slicing, or change it on openscad.

Tagi