Micro SD Card Holder for Cards with MicroMax holders.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Micro SD Card Holder for 3 Cards with MicroMax holders and two regular µSD cards
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a SD card holder for my Ender 3 V2 Neo where my MicroMax SD card grip equipped memory cards will fit in so i modified the existing box for my needs with Tinkercad.
It takes three cards with grips ant two regular ones.
There is a version with mounting holes that can be installed in the printer's slots using M3 t-nuts and M3 x 8 mm screws and one without holes to be just standing around or being glued to a flat surface. I also added an opening on the bottom for dust and dirt to fall out and to rescue grip-less cards that were accidentally pushed into the 3 deeper slots, so i recommend to print the "open" versions. ;)
https://www.printables.com/de/model/77594-micromax-sd-card-grip
https://www.printables.com/de/model/203578-drop-in-t-nut-2020-2040-extrusion-m3-nut-insertion