New Sovol SV01 BMG e3d V6 5051 Conversion DissEd
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy, but strong conversion of the original Sovol Titan Extruder to a BMG double gear extruder with an e3d v6 Hotend.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi everyone,
Im back with a big update on my sovol sv01 conversion. After not beeing very happy about my old design I decided to use a longer tested idea and remixed the mainparts and added an adapter plate for the sovol sv01. The mainparts are taken from a design of DissEd, I didnt find the one I was using, so I think naming him here is important. I modified everything except from the fan shroud and the fan holder.
I also put an older video of the printer, dont mind the loud sounds.
You will mainly need a bmg extruder, an e3d v6 Hotend and especially some M3x12mm screws and m3 nuts. The other parts can be used from the sovol.
You cant use a 40x40x20mm fan for the cooldend cooling, because of the mounting screws for the adapter plate.
The printer now got a PINDA Probe, which can be connected as the Z endstop, taking 5v from the pins under the display port. Im running everything with klipper and input shaper and getting closer to the speed limit.
For using the PINDA, you will need a magnetic steel bed. Much easier to remove, than the original one.
For the settings of the PINDA probe:
x_offset: 23
y_offset: 5
If you have any further questions put them here please.
Yours, William