Bondtech Extruder Prusa i3 MK3s Sensor Cover Pc4-M10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bondtech Extruder Prusa i3 MK3s Sensor Cover for reverse bowden with PC4-M10.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 242
- Wydruki
- 0
- Wyświetlenia
- 2106
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Bondtech Extruder Prusa i3 MK3s Sensor Cover for reverse bowden with PC4-M10.
In this case you would only need to use the "vslot_mount_pc4-m10" of the Bear X axis and Extruder. Here is a link for the Reverse Bowden, where the file mentioned above is. Thanks to Grégoire Saunier for all his effort, I really recommend making the complete Bear Upgrade to your mk3s.
Bear X axis and Extruder link:
https://github.com/gregsaun/bear\_extruder\_and\_x\_axis/tree/master/optional\_parts/reverse\_bowden
Grégoire Saunier Thingiverse:
https://www.thingiverse.com/pekcitron/designs
Prusa i3 Bear Upgrade v2.0 by Grégoire Saunier:
https://www.thingiverse.com/thing:2808408
Prusa I3 MK2.5S / MK3S Bondtech Extruder upgrade:
https://www.bondtech.se/en/product/prusa-i3-mk3s-extruder-upgrade/
Best regards.
Print instructions
Licence: Creative Commons - Attribution Category: 3D Printer Extruders Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20%
Filament: Atomic PETG CF Black
Notes:
Printed with my Prusa i3 MK3S Full Bear Upgrade with bmg.