1 / 3
Sonoff SNZB-04 Spacers/Adapters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So my front door has a nice surface for mounting my Sonoff SNZB-04 Door sensors, but all my other doors weren't so much
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
SO i made various sizes of spacers for my Sonoff SNZB-04 sensors to make them attach a bit easier to your doors/frame/trim.
Body 1 is the smaller piece, Body 2 is the larger piece.
I made each spacer at 3mm/5mm/10mm and 15mm.
I then made body 1 with some different contours for different door trim patterns. It doesnt need to fit to the contour/round edges perfectly, as (at least for me) the double sided tape will help out.
Hope this helps someone.