CR-10 V3 HOT END CABLE CHAIN LINK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It works with CR-10V3 with direct drive extruder.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
It works with CR-10V3 with direct drive extruder. It also has a tunnel for CRtouch or BLtouch wires. Clip design allows you to install this chain links without removing any wires from the board. You can also remove the bolts on extruder and remove the extruder without removing this parts.
As you can see on last picture, PETG won't work for heated chamber. This black PETG was working fine when I was using my printer in open area. But when I started using in an enclosed heated (55C-65C) chamber, it sagged and melted. Recommend print them with ABS (light blue). I printed with 20% infill, support ON, gyroid infill.
Sorry for some weird shapes, this was my first design project by using tinkercad. But it functions great.