1 / 2
Caddy Organizer for 12 21mm Pigment Ink Dropper Bottles — zdjęcie 1
1 / 2

Caddy Organizer for 12 21mm Pigment Ink Dropper Bottles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bottle caddy for Craft Smart resin pigment inks (0.33 fl. oz/9.7mL bottles with a 21mm/.827 inch diameter).

Ocena
5 / 5
Polubienia
10
Pobrania
56
Wydruki
1
Wyświetlenia
256
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After spilling some of this ink on carpet, I needed a comapct organizer for my resin pigments that would keep them upright. This is a simple bottle caddy designed for Craft Smart resin pigment inks (should fit other bottles with a 21mm diameter). Not too snug but hugs the bottles enough that they shouldn't fall out.

I printed parts separately in PLA with a .6mm nozzle. My printer's settings aren't dialed in and my plate isn't in the best condition so I got some warping on the handle and had to scrape it down a bit to fit. I didn't use glue and it's been fine but you can for extra security.

Tagi