Kitchen Sink Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kitchen Sink Caddy with baskets, locked into place by the faucet.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Kitchen Sink Caddy with baskets, locked into place by the faucet. The water ending up on the base plate is drained by a slight angle. The baskets are detachable and could easily be replaced or printed in different colours.
The sloped drain plate, is modelled to be printed without supports (split the STLs into parts). Perhaps some drops of glue is needed.
Since I modelled it after my own sink, chances are that it will not fit yours perfectly. I am happy to provide variations if you provide measurements. UPDATE: I already realised I needed a bigger one so I have uploaded a large version of the right side.