1 / 5
BIGTREETECH BTT UPS 24V V1.0 Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT UPS 24V Case remix
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Remixed this case, so it doesn't need additional hardware to mount to the V-slot, and moved the mounting part to the back, so the factory signal cable is long enough. Changed the position of the holes, so stuff - mainly filament - won't fall into it. The indicator led is still visible form the sides. The original top part didn't stay in place for me, so modified that too, this way it is more secure.
The top part should be printed upside down.
I used two M3x4 screws to mount the board to the case