[Cube] Chemistry Symbols | [Cube] Symboles Chimie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just radom chemistry symbols (possible to make a cube) | Juste quelques logos de chimie (possible de faire un cube)
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 583
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
[Français en-dessous]
[EN]
I just wanted to create small (40mm) chemistry symbol to put on my lab desk. After 3 designs, I decided to do more, and finally have the idea to do a cube.
You can choose to print the plates with or without the angles.
[Update 15.01.2024] Learning of my following project [Tetrahedron] 4 elements. I made a Version 2 of the angles, much better
Technic:
- Printed on Prusa Mini+
- Nozzle 0.25mm - layer 0.15mm
- Printed in different brand of PLA filaments
- Prima Creator
- Black Matt | White Matt | Light Blue | Light Green | Red
- Form Futura
- Yellow | Orange
- 3DJAKE
- Pink
- Prima Creator
Instructions:
Be nice when you put the plates in the angles, it's tight, you might break the border of plates !
The plates:
- “Ironing” parameter actived - Look nicer this way
- I used color change in PrusaSlicer, 4x4 layers of 0.15mm each (If you open the files as a project, you will already have the color change)
- 4 color changes
- Black
- Color
- White
- Black
The angles:
- You must to print 8 of them it the “pyramid position” (If you open the files as a project, you will already have one (or 8) in the correct position)
- Printed in Prima Creator Black Matt
[FR]
Je souhaitais simplement créer des petits (40mm) symbole évoquant la chimie à mettre sur mon bureau au labo. Après 3 logos, j'ai décidé d'en faire plus et j'ai finalement eu l'idée d'en faire un cube.
Vous pouvez donc imprimer les plaquettes avec ou sans les angles.
[Mise à jour 15.01.2024] Aprennant de mon projet suivant [Tétraèdre] 4 élements. J'ai créé une version 2 des angles, bien meilleurs.
Technique:
- Imprimé sur Prusa Mini+
- Buze 0.25mm - couche 0.15mm
- Imprimé avec différentes marques de filaments PLA
- Prima Creator
- Noir Matt | Blanc Matt | Bleu Clair | Vert Clair | Rouge
- Form Futura
- Jaune | Orange
- 3DJAKE
- Rose
- Prima Creator
Instructions:
Allez-y doucement lorsque vous emboîtez les plaquettes dans les angles, vous pourriez casser les bordures.
Les plaquettes:
- Paramètre “Lissage” activé - c'est plus joli comme ça
- J'ai utilisé le changement de couleur dans PrusaSlicer, 4x4 couches de 0.15mm (en ouvrant les fichiers en tant que projet, le changement de couleur est déjà “actif”)
- 4 changements de couleur
- Noir
- Couleur
- Blanc
- Noir
Les angles:
- En imprimer 8 en position “pyramide” (en ouvrant les fichiers en tant que projet, vous aurez une pièce (ou 8) dans la position correcte)
- Imprimé avec Prima Creator Noir Matt