1 / 2
Filament stopper for the Ender 3 v3 SE spool holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents the thread or spool from falling off the holder to the printer bed. Should work with any holder 30mm diameter.
- Ocena
- 5 / 5
- Polubienia
- 155
- Pobrania
- 1325
- Wydruki
- 24
- Wyświetlenia
- 3254
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 24) (Komentarze: 26)Remiksy (0)Kolekcje (217)Powiązane
At first I noticed that the Creality filament was falling off the holder during test printing. After that I saw that during fast printing the spool was also moving a bit and decided to make such a stopper.
To keep it tighter and less spinning, I recommend using a bit of tape on the holder underneath.
Should work with any other printer holders with a 30mm diameter.
Don't forget to upload your makes!