1 / 6
Axial SCX6 Honcho Rear Bumper for Trailer Hitch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New Honcho bumper compatible with Jeep trailer hitch
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 1695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
I ordered an SCX6 trailer hitch but was surprised when it didn't fit my Honcho. So I designed a new rear bumper to make it work.
It is modeled around a cheap ali express SCX6 hitch but I think they're all the same.
The light holes are designed for a tight fit so you may have to clean out the hole after printing.
Print with supports. I recommend an impact resistant filament like PETG, PC, or nylon. At least 4 walls and at least 30% infill.
Hope this helps!