1 / 6
Trimmer guard-21mm — zdjęcie 1
1 / 6

Trimmer guard-21mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Additional guard for Woner HC715B hair trimmer.

Ocena
0 / 5
Polubienia
7
Pobrania
41
Wydruki
0
Wyświetlenia
410
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

Provides a little extra length for the trimmer guard set that comes with the Woner HC715B hair trimmer.  Snaps on securely like the original guards.  

Print with the narrow edge of the blades on the print bed to provide the cleanest trimmer attachment interface.  Print requires a brim and has minimal support material at the back edge of the blades; will require cleanup after printing with a hobby knife and sandpaper.

Settings:
Filament PLA
Nozzle 0.6
Layer 0.15mm
Supports Yes/Snug/.05 Top contact Z distance
Fill 15% gyroid
Perimeters 2
Temp 215C