UFS-066 Saeco Espresso Funnel & Tamper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have an old Saeco, Aroma, espresso machine. It works fine, and I like the coffee it makes. While surfing Thingiverse…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 831
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have an old Saeco, Aroma, espresso machine. It works fine, and I like the coffee it makes. While surfing Thingiverse files, I saw several espresso funnels and tampers. Many of these were for DeLonghi machines. I figured it was time to remix to suit my machine.
I used this thingiverse file as the basis for my funnel. https://www.thingiverse.com/thing:4128550 On this page decandenza says that he adapted the funnel from other sources. I didn’t see a listing for the original source. He also had a tamper, but I found a slighly nicer tamper elsewhere.
Nicer tamper, nearly the correct size. It was 52mm, but I needed 53.
https://www.thingiverse.com/thing:3772264 I simply scale the whole thing 2%. Works great and fits perfect.
Full disclosure, the funnel file I attached is not the file I printed. My original print was small in a couple of places. I had to trim spots with a knife. I fixed this in the model, but I did not reprint. Let me know if there are any issues.
Why are the parts green? Because that is the color filament I had loaded at the time.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
.2 adaptive
Infill:
20% with 3-4 layers
Filament:
generic PLA green
Notes:
Used a wall thickness of 1mm for printing. Infill isn’t too important. This part is not structural and doesn’t need to be strong.
Category: Kitchen & Dining