RaspberryPI CSI camera stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 15cm tall simple camera stand for a Raspberry PI CSI camera
- Ocena
- 4,5 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The CSI camera for a Raspberry PI will slot into the camera mount which then sits tilted forward 15cm above the surface. It is intended for a camera connected by the CSI ribbon cable to a rPI Zero on a MK3 Prusa. The CSI cable exits from the rear.
The angle of tilt is intended to be variable.
To use this model you need to print:
CameraHolder
Tower150
And a matching pair of:
Join
Wedge
The different join and wedge tilt the camera and different angles.
A Join/Wedge of 70 learns forward 20degress
(80 → 10 degress lean in)
(If you do download and print, please do leave a make/ review good or bad; it takes time to post stuff on printables and its nice to know people have made use of that effort.
And if you do leave a bad review as something is wrong or your don't like it I get to learn from you and possibly fix it for other people. So don't hold back.)