1 / 3
Print-in-Place Japanese Style Abacus (Soroban) — zdjęcie 1
1 / 3

Print-in-Place Japanese Style Abacus (Soroban)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Japanese style abacus that is printed all at once as a single job.

Ocena
0 / 5
Polubienia
38
Pobrania
229
Wydruki
0
Wyświetlenia
1105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Math
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This abacus (frame and beads) are all printed together in place.  Overall dimensions are: 186mm x 90mm x 10mm.

For a simple 2-color design, load the STL file and program a filament change to print the frame decorations and tops of the beads in a different color.  The basic frame is 6mm high, so program the color change above 6mm (6.2mm when using 0.2mm layer height).

If you have an MMU, you can assign different colors to the beads, frame, and decorations.  After loading the STL file, split it into parts to get independent control of each element.  As a starting point, you can use the 3MF project file which is already split into parts with color assignments.

If you have not used an abacus before, there are many resources on-line; here is a good starting point:

https://en.wikipedia.org/wiki/Soroban

Miscellaneous Notes/Comments:

  • Print using PLA with a 0.4mm nozzle and 0.2mm layer height.
  • No supports are required.

Tagi