3D Gloop HSW holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct insert 3D Gloop (75ml bottle) holder for the honey comb storage wall
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Created to store my bottle of PLA 3D Gloop (75 ml), created with a bit of extra diameter to make insertion and removal smooth without it being too loose. Also tall enough to keep the bottle in place securely but still able to see the Gloop logo so you know what is inside.
Print Settings
Printer Used:
Bambu Lab P1S
Rafts:
No
Supports:
Yes (Tree, auto, build plate only). I've printed a few of these now for friends, if you let the part and plate fully cool the supports usually remain on the plate and there is very minimal to no clean up on the part.
Resolution:
0.20mm
Infill:
15% Gyroid
Filament: Bambu Lab Matte Lilac purple (11700)