Sigma 170-500 Lens Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lens hood for the Sigma 170 to 500 telephoto lens.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 176
- Wydruki
- 2
- Wyświetlenia
- 751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a lens hood for the Sigma 170 to 500 telephoto lens. This is the second lens hood I designed for myself, and yes, I'm pretty hard on my cameras and equipment. Most of my glass is Nikon, and it is easy to get replacement parts for those. Unfortunately, I have had a hard time finding parts for my Sigma lenses.
The tolerances are very tight for this print and I designed this to be printed in ABS. This lens may be a little too loose if you print this in PETG. It will also be too loose in PLA, but I would NOT print this in PLA! I'm pretty certain that you would use a 500mm lens outside, and PLA will not hold up to the heat and sun.
Furthermore, you need to print this in black! Black will help reduce glare and color shifts. Additionally, black is much more UV resistant than other colors. I used Atomic filament carbon fiber ABS. The carbon fiber helps reduce glare.
No supports are needed. I recommend printing this at a layer height of 0.2 which provides adequate strength.