MTG Life counter, universal score counter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal counter for gaming
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 2216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modeled this counter for my regular MTG battles with my son and it works really well.
It took some time to refine the models, pls consider printing the files as they are. All necessary tolerances are already part of the models.
Of course you are free to scale as preferred.
As usual, no support needed.
Printing notes:
General - Printed in PETG with 150mm/s and 0.16 layer high (0.4mm nozzle)
25% infill and 5 Walls
Base - Dont print with 0.2mm layer height or more or the frame will stuck
Bolt - The Bolts are thicker than the holes, it is mentioned this way pls dont scale them down, they are designed flexibel. You can of course use Screws and Nuts if you like.
Colored plate - Defines the colour of the letters, no extra print information needed.
Frame_print - For best results consider printing with the model laying at the side. It takes more time to remove the printed apron but it is worth it.
Gear - No extra information needed.
Tower - Activate bridging, no support needed. Best qualitiy when you place it on the top (reverse letter appereance) Please consider to add an apron to enhance the adhesion (especially with bed slingers)