Keyback replacement 500g door puller for StealthPress
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the 500g door puller replacement for keyback in stealthpress.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This is the 500g version of the door puller that replaces keyback in the original stealthpress.
The force isn't quite strong enough to pull the iron up after you release it, but plenty enough to hold it in place, so it works good enough for me as I had one lying around.
No real benefits over using the stronger versions other than smaller footprint and less risk of the wire poking your eye out if you're clumsy when installing it.
The BOM is two standard M3 heatset inserts, two M3x8 to mount the plate to the stealthpress and two M3x16 (or longer) to mount the puller to the plate.
Mount the plate to the press first before you mount the puller to the plate. You can mount it with the wire closer or farther away from the stealthpress. Whatever your preference, both work fine.