CO2 tubing channel for maximum CO2 uptake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tubing channel for a CO2 tube. This channel can be combined with the Bioflow M filter and a CO2 diffusor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was annoyed that my diffusor was floating upwards when the suction cup went weak and also by the look of the tubing in my aquarium. So I designed this tubing channel which holds my diffusor directly under the outlet of the Bioflow M filter for maxium CO2 uptake into the water. Should work with most commercial CO2 Diffusors and tubing. I recommend to use an infill of 100 % to avoid excessive mould building inside the 3D print.
Printed with Prusament PETG
Nozzle diameter
0.4 mm
Layer height
0.15 mm
Infill density
100%