Sturdier Version of Full/Empty Flag for Curbside Waste Bin / Trash Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Visual indicator to show whether the bin has been emptied or not. Remixed to make it sturdier.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Still at it, despite some setbacks, as I continue to consider the trash bin flag one of the most useful practical prints. Why go to curb and check on the status of your trash bin if you can look out of the window and quickly check whether the flag is up or down?
But Kaje's design and my remixes kept breaking. I finally discovered the culprit. In this design, as the flag extends beyond the clip, it can slide to the side to the point that with the trash bins we have, it can fall down over one of the bin's hinges when the bin gets emptied and may end up getting crushed. While raking my brain over how to improve it I noticed @teraflop's version (https://www.printables.com/model/771018), which can't move over that far. So at this point I recommend that model over the one I published here earlier and suggest you download and like @teraflop's model if you're looking for a trash bin indicator.
Simply for reference, I include here a 3mf file with the version of @teraflop's model that I printed and use, which re-implemented in Fusion, scaled up so that it's easier to see from a distance, and added some cosmetic changes. Print as oriented in the 3mf file, with supports, and PETG for flexibility.
The original post:
2nd version of my remix of kaje's ingenious flag, arguably one of the most useful models I've printed: No more wasted trips to the curb, just to find out that the bin hasn't been emptied yet by the waste removal company.
After three months of use the original broke. As it had become one of those things I can't live without anymore 🙂, I printed it again but used the opportunity to make it a bit studier. I increased thickness slightly and removed the taper to the top.
Alas, my “improved version” also lasted only a few months 😢😡, and I (or rather. the trash haulers) broke two more copies, each time at the clip. So back to the drawing board. This time, I made the clip even thicker and switched to a locking mechanism that uses screws.
See kaje's model for assembly and use instructions. Be mindful of the correct orientation of the clip. After pushing the clip onto the bin handle and sliding the tip of the clip into the flag, screw two #6 wood or sheet metal screws (0r 3 mm screws), 3/8 or ¼'' long, into the hole in the clip to secure it. I printed this new one now with PETG-CF, 3 perimeters and 20% cubic infill.
Let's see if it will last longer… Knock on wood!
If you like what I'm doing…
… consider buying me a coffee or joining my Club.